INVT iMars MG Series User Manual

INVT iMars MG series grid-tied solar inverters Display panel
5.4.5 System Information
Press “ ” and “ ” in the main interface to select “System Information”, and then press “ENT” to
view the parameters which is shown in figure 5.8.
System Information
Part No .
Serial No .
Soft Ver
Cert . Area
Run Param
Figure 5.8 System information
The system information include “product model”, “serial No.”, “software version” and “certificate
version”.
System Ver
Version1 : V 1. 05
Version
2 :
V1
.05
MCU Version
:
V
1.
05
Figure 5.9 System version
5.4.6 Faults
Press “ ” and “ ” in the main interface to review the fault history, and then press “ENT” to view
the sub-menu which is shown in figure 5.10.
Fault
1: A005 Grid under freq
2: A
001 Input under Volt
3
:
1
Figure 5.10 Fault information
There are 8 pieces of fault information in the record which is shown in figure 5.10; otherwise it will
display “No Fault!” Refer to section 5.4.2 for more detailed information.
5.4.7 Inverter control
Press “ ” and “ ” in the control interface, and then press “ENT” to view the sub-menu which is
shown in figure 5.11.
Control Menu
On/
Off
Clear
Restart
Factory
Figure 5.11 Control interface
- 45 -

INVT iMars MG Series Specifications

General

Brand	INVT
Model	iMars MG Series
Category	Inverter
Language	English