INVT iMars MG series grid-tied solar inverters Safety precautions
Ensure that there is no electromagnetic interference from other electrical and
electronic equipments on the installation site.
Do not refit the inverter unauthorized.
All the electric installation needs to be compliance with the national or local
laws and standards.
The temperature of individual parts or the enclosure of the inverter–especially
the heat sink may become hot in normal operation. There is a danger of
burning. Do not touch.
Must be grounded before operation.
Do not open the cover of inverters unauthorizedly. The electrical parts and
components inside the inverter are electrostatic. Take measurements to avoid
electrostatic discharge during relevant operation.
1.2.1 Delivery and installation
Keep the package and unit complete, dry and clean during storage and delivery.
Please remove and install the inverter with two or more people, because of the
inverter is heavy.
Remove and install the inverter with appropriate tools to ensure safe and normal
operation and avoid physical injury or death. The people also need mechanical
protective measures, such as protective shoes and work clothes.
Only qualified electricians are allowed to install the inverter.
Do not put and install the inverter on or close to combustible materials.
Keep the installation site away from children and other public places.
Remove the metal jewelry such as ring and bracelet before installation and
electrical connection to avoid electric shock.
Do cover solar modules with light-tight materials. Exposed to sunlight, solar
modules will output dangerous voltage.
The inverter input voltage does not exceed the maximum input voltage;
otherwise inverter damage may occur.
The positive and negative pole of solar modules can not be grounded, otherwise
irrecoverable damage may occur.
Ensure the proper grounding of the inverter, otherwise, improper connection or
- 7 -
To Next Page
Loading...
Need help?
General