Firmware and Software Update
Firmware Update
To update the firmware on your KeyMander, please follow the steps below:
1. Go to www.IOGEAR.com/software/GE1337P/
2. Select the latest firmware link and download to your PC.
3. Once finished, unzip the file and remember the saved location.
4. Connect your KeyMander to your PC:
a. Plug one of the included mini USB B cables to the PC Port
located on the back of the KeyMander.
b. Plug the other included mini USB B cable to the Power Port
located on the back of the KeyMander.
c. Connect both USB cables to your PC
5. Launch the KeyMander software and click Connect.
6. On the Groups & Profiles page, click Menu then Upgrade Firmware.
7. Locate the unzipped “firmware.exe” file and click Open.
8. The KeyMander software will close and the KeyMander firmware upgrade
utility will launch automatically.
9. Click Next to begin the upgrade process. When the firmware upgrade is
complete, click Finish and the utility will close.
Software Update
To update the software on your KeyMander, please follow the steps below:
1. Connect your KeyMander to your computer.
2. In the KeyMander software home page, click Menu and go to Export All.
a. Choose a location where you want to save the .conf file (this file
contains all your saved profiles and groups).
3. Create a new folder on your desktop.
a. Drag the software application into this folder.
b. Open the software application again. Click on Menu and go to
Import All.
c. Select the .conf file you saved earlier. All your groups and
profiles will now be imported into the application.
4. Download the new software version from
www.IOGEAR.com/software/GE1337P/
5. Once the new software version has been downloaded, drag the application
into the folder that contains the older software version.
6. The groups/profiles from the old software will now automatically transfer
over to the new software application. You may now delete the older
software application.
To Next Page
Loading...
