IPG YLR Series - Fiber Output Options; Connectors and Collimators

YLR-SERIES USER GUIDE
22
PRODUCT DESCRIPTION | IPG PHOTONICS
Figure 7: Optical Output Fiber Connector
Machines with a Collimator
Collimators come with a protective window that can be replaced if damaged. The collimator end cap must
be removed prior to use and should be used when storing the machine. Cleaning of the protective window
should be performed as needed using the same materials and techniques described in the “Optical Fiber
Connector Inspection and Cleaning Guide” section.
Figure 8: Fiber End with Collimator