UNPACKING INSTRUCTIONS | IPG PHOTONICS
5. Place the fiber on top of the unit and carefully lift it out of the box. IPG highly recommends two
people to lift the unit at all times.
6. Check the inventory of following items:
Cover, AC Power Inlet(P45-001394) – Qty. 1
Strain relief (P40-002294) – Qty. 2
Strain Relief Nut (P40-002293) – Qty. 1
Harting (24-pin) Interface Kit (P30-000721) – Qty. 1
o Connector (P40-001344) – Qty. 1
o Hood (P40-001343) – Qty.1
o Cable Seal (P40-000891) – Qty. 1
o Contact Pins (P40-000888) – Qty. 16
o Contact Pins (P40-000887) – Qty. 10
Filter media – Qty. 1 (Contact IPG for Filter specification)
Ethernet Adapter Kit (P40-001244) – Qty. 1
Keys – Qty. 2
8-pin Interface Connector (P30-001734) – Qty. 1
7. Retain all packaging for future transportation or storage needs.
To Next Page
