Advanced Function
When the selected number is empty, the interface would prompt that the re-
called file is empty. The user needs to select the file again or return and en-
ter the Edit menu for editing.
3. After successful recall, the user can view the setting information of the exist-
ing List file. The following parameters can only be viewed, and cannot be
edited. To modify them, please return and enter the Edit menu to select the
corresponding file number for editing.
1: List Setup
2: View Step=1/6
4. Rotate the knob, select “List Setup”, and press [Enter] key for confirmation.
Rotate the knob to view the attribute parameters of the List file in successive.
The contents are consistent with the List Setup contents during editing of the
List file.
5. Rotate the knob, select “View Step=1/6”, and press [Enter] key for confirma-
tion. Set the number of List step to be viewed, and press [Enter] key to enter
the parameter viewing page of the selected Step.
S001 Value=1.000V
S001 Slope=0.001S
S001 Time=0.005S
S002 Value=2.000V
S002 Slope=0.001S
S002 Time=0.005S
...
Rotate the knob for scrolled viewing of parameters of all Steps of the List.
The voltage and current parameters in the step vary with the existing List
mode.
6. Press [Esc] key, and exit the existing page.
Run List file
After the List files are edited, the user needs to enable the List function and re-
turn to the main interface to trigger the running.
1. Select the List file to be run in the Recall List.
2. In the List function setting interface, select “Run”, and press [Enter] key to
confirm that the instrument automatically returns to the main interface and
waits for trigger.
0.000V 0.0000A
0.0W WTG
3. Press [On/Off] to turn on the instrument output.
4. Conduct trigger based on the trigger mode set in the system menu, such as
front panel trigger mode. Press [Shift]+[On/Off] (Trigger) key for triggering,
and the instrument would output based on set sequence.
12.000V 5.0000A
100.00W RUN
Copyright © Itech Electronic Co., Ltd.
53
To Next Page
Loading...
Need help?
General