Power Supply Function
Static Static PV curve setting.
Curve Open or edit a fixed format PV curve.
Open Select a fixed format PV curve.
Recall
Inner
Sas File
Set the name of the PV curve
file and recall the PV file
stored inside the instrument.
Edit Edit a fixed format PV curve.
Pmp Set the maximum power.
Vmp Set the maximum power
voltage.
Formula Regulatory settings. The
choice of solar panel materi-
als under different regulations
is different.
SANDIA
• TF: Thin-Film
• SCMC: Stand-
ard Crystalline
or Multi-
crystalline
• HEC: High-effi-
ciency
Crystalline
E-
N50530
• TF: Thin-Film
• cSi
Save To Set the saved file name. Pa-
rameter setting ranges from 1
to 100
User-
de-
fined
User-definable PV curves
Voc Set the open-circuit voltage value.
Imp Set the maximum power current value.
Vmp Set the maximum power voltage value.
Isc Set the short-circuit current value.
Copyright © Itech Electronic Co., Ltd.
112
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
