Basic Operation
3. After the menu items are set, press [Enter] again to save the modified
contents.
You can press [Esc] to return to the previous menu.
The description of the menu items is shown in the table below.
System System Menu
Beep Set the beeper state.
On
Turn the beeper on.
Off
Turn the beeper off.
PowerOn
Select the power-on state.
Reset
When the instrument is powered on, the instru-
ment will initialize some settings and [On/Off]
state.
Last
When the instrument is powered on, the instru-
ment will remain the same settings and
[On/Off] state as last time you turned off the
instrument.
Last+Off
When the instrument is powered on, the instru-
ment will remain the same settings as last time
you turned off the instrument, but the [On/Off]
is OFF state.
Sense Set the sense function state.
Off Turn the sense function off.
On Turn the sense function on.
ListTrig Source Set the trigger method for the List files running.
Manual
Manual trigger
Bus
Bus trigger
External
External trigger
DataLogger Trig
Source
Set the trigger method for the data logging.
Manual
Manual trigger
Bus
Bus trigger
External
External trigger
I/O Con
Set the communication information between instrument and
PC.
USB USB communication interface
LAN LAN communication interface
Copyright © Itech Electronic Co., Ltd.
26
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
