Inspection and Installation
Reset the LAN Setting
After configuring the LAN settings, the user need to reset the settings to make it
valid in the instrument. The operation steps to reset the LAN settings are as
follows.
1. Press the composite keys [Shift] + [Select](System) to enter into the system
menu interface.
2. Rotate the knob to select I/O Config and press [Enter] key to confirm.
3. Rotate the knob to select LAN and press [Enter] key to confirm.
4. Rotate the knob to select I/O Advance Config and press [Enter] to enter
the LAN advanced setting interface.
5. Rotate the knob to select LAN Reset and press [Enter] key to reset the LAN
parameter configuration.
• NO: indicates refuse to reset the LAN setting.
• YES: indicates reset the LAN setting.
View LAN Interface Information
The operation steps to view the LAN interface information are as follows.
1. Press the composite keys [Shift] + [Select](System) to enter into the system
menu interface.
2. Rotate the knob to select I/O Config and press [Enter] key to confirm.
3. Rotate the knob to select LAN and press [Enter] key to confirm.
4. Rotate the knob to select I/O Advance Config and press [Enter] to enter
the LAN advanced setting interface.
5. Rotate the knob to select LAN Info and press [Enter] to view the LAN inter-
face information.
6. Rotate the knob to view the LAN interface information. Refer to 1.7 System
Menu at a Glance for more information.
7. After setting, press [Esc] to exit.
Enable LAN services
The configurable services include: mDNS, Ping, Http, Telnet, VXI-11 and Raw
Socket. When using the LAN interface, these services are enabled by default
and can be used directly. If you need to turn it off or on again, please refer to the
following steps:
1. Press the composite keys [Shift] + [Select](System) to enter into the system
menu interface.
2. Rotate the knob to select I/O Config and press [Enter] key to confirm.
3. Rotate the knob to select LAN and press [Enter] key to confirm.
4. Rotate the knob to select I/O Advance Config and press [Enter] to enter
the LAN advanced setting interface.
Copyright © Itech Electronic Co., Ltd.
24
To Next Page
Loading...
