ITech IT8000 Series - Technical Specification; 6.1.2 IT8012-500-60 Specifications

Technical Specification
6.1.2 IT8012-500-60
Parameters IT8012-500-60
Rated value ( 0
℃-40 ℃)
Input voltage
0～500V
Input current
0～60A
Input power
0～12000W
Input resistance
0～8333Ω
Min. operating
voltage
1.98V at 60A
Setup Resolution
Voltage
0.01V
Current 0.001A
Power 0.1W
Resistance 0.1Ω
Read Back
Resolution
Voltage
0.01V
Current 0.001A
Power 0.1W
Resistance 0.1Ω
Setup Accuracy
(within 12 months,
25℃ ±5℃) ±(％of
Output+Offset)
Voltage
≤0.1% + 500mV
Current ≤0.1% + 60mA
Power ≤1%Pmax
Resistance
≤2%Rmax,0～10%Rmax;≤5%Rmax,10%～Rmax;
Read Back Accu-
racy (within 12
months, 25℃ ±5℃)
±(％of Output
+Offset)
Voltage
≤0.1% + 500mV
Current ≤0.1% + 60mA
Power ≤1%FS
Resistance
≤2%Rmax,0～10%Rmax;≤5%Rmax,10%～Rmax;
Ripple (20Hz
-20MHz)
Voltage ≤500mVpp
Current ≤60mArms
Setup Temperature
Coefficient (％of
Output/℃+Offset)
Voltage
≤0.01% + 50mV
Current ≤0.02% + 12mA
Read Back Temper-
ature Coefficient (％
of Output/℃+Offset)
Voltage
≤0.01% + 50mV
Current ≤0.02% + 12mA
Dynamic
Rising slope
60A/ms
Falling slope
60A/ms
Copyright © Itech Electronic Co., Ltd.
114