ITech IT8000 Series - Technical Specification; 6.1.3 IT8018-500-90 Specifications

Technical Specification
6.1.3 IT8018-500-90
Parameters IT8018-500-90
Rated value ( 0
℃-40 ℃)
Input voltage
0～500V
Input current
0～90A
Input power
0～18000W
Input resistance
0～5556Ω
Min. operating
voltage
2.97V at 90A
Setup Resolution
Voltage
0.01V
Current 0.001A
Power 0.1W
Resistance 0.1Ω
Read Back
Resolution
Voltage
0.01V
Current 0.001A
Power 0.1W
Resistance 0.1Ω
Setup Accuracy
(within 12 months,
25℃ ±5℃) ±(％of
Output+Offset)
Voltage
≤0.1% + 500mV
Current ≤0.1% + 90mA
Power ≤1%Pmax
Resistance
≤2%Rmax,0～10%Rmax;≤5%Rmax,10%～
Rmax;
Read Back Accu-
racy (within 12
months, 25℃ ±5℃)
±(％of Output
+Offset)
Voltage
≤0.1% + 500mV
Current ≤0.1% + 90mA
Power ≤1%FS
Resistance
≤2%Rmax,0～10%Rmax;≤5%Rmax,10%～
Rmax;
Ripple (20Hz
-20MHz)
Voltage ≤500mVpp
Current ≤90mArms
Setup Temperature
Coefficient (％of
Output/℃+Offset)
Voltage
≤0.01% + 50mV
Current ≤0.02% + 18mA
Read Back Temper-
ature Coefficient (％
of Output/℃+Offset)
Voltage
≤0.01% + 50mV
Current ≤0.02% + 18mA
Dynamic
Rising slope
90A/ms
Falling slope
90A/ms
Copyright © Itech Electronic Co., Ltd.
116