ITech IT8000 Series User Manual

Quick Reference
Table 1–1 VFD Indicator Lamps Description
Flag Function
Description
Flag Function Description
OFF The input of the
load is turned off.
Sense Sense function of the load is
enabled.
CV The load is in a
state of constant
voltage input.
Rear Analog function begin to
work.
CC The load is in a
state of constant
current input.
Addr When received command
successfully, the flag will dis-
play 3 seconds.
* The keyboard lock
is turned on.
Rmt Indicates that the instrument
is working in remote control
mode.
CR The load is in a
state of constant re-
sistance input.
Error Error occur
Shift Using composite
function key
Prot The instrument enters the
protection state.
SRQ Indicates that the
internal status re-
quest event occurs.
Trig The instrument is in a state
of waiting for a trigger.
CW The load is in a con-
stant power input
state.
- -
1.7 Configuration Menu Function
This section gives an overview of the configuration menu of the IT8000 series
load.
The procedures to operate the configuration menu are as follows.
1. Press the composite keys [Shift]+[V-set] (Config) on the front panel to enter
the configuration menu.
Copyright © Itech Electronic Co., Ltd.
9

ITech IT8000 Series Specifications

General

Brand	ITech
Model	IT8000 Series
Category	Test Equipment
Language	English