To Next Page

To Previous Page

Getting Started

automatically. This provides convenience for the user to set. The knob can

works with the left or right keys. Use the left or right keys to move the cursor

position.

After entering the menu interface, the knob can also be used to scroll pa-

ges to view menu items.

3.3 Use the Front Panel Menu.

The front panel provides multiple menu keys and the user can access the instru-

ment menu by using the front panel keys, including Config menu, System

menu, Protect menu and Function menu. And the user can change the related

system setting in the menu. Each menu is briefly described as follows.

• The user can set the parameters related to electrical properties in the

Config menu, including the current operation mode, slope, input delay time,

Von function.

• The user can set the function related to instrument system in the System

menu, including the key beeper, Sense function, power-on state, trigger

source, communication method, data logger method, digital I/O function set-

ting, parallel function, system information and so on.

• The user can set the parameters related to instrument protection function in

the Protect menu, including OCP /OPP /UVP.

• Function menu includes input list, batterydischarging test function and so

on.

The user press the complex keys to enter into the menu interface. The menu is

divided according to the function item and the corresponding operation is set in

the lowest level menu item. For example, the key beeper is set in System→-

Beep. Set the Beep item to off or on. Please refer to 1.7 Configuration Menu

Function, 1.8 System Menu Function and the corresponding chapters for de-

tailed menu description.

After entering the menu interface, the screen displays the optional menu. Rotate

the knob or press left or right keys to view the menu items. When the number in

front of the menu item is blinking, indicates this item is selected currently. Press

[Enter] key to enter the selected menu item and press [Esc] to exit the menu.

ITech IT8000 Series User Manual

Other manuals for ITech IT8000 Series