To Next Page

To Previous Page

Basic Operation

5.2 Key Lock Function

This function can prevent the load from the panel keys misoperation during us-

age. Press the composite keys [Shift]+[2] (Lock) to lock front panel keys and

the lock symbol “*” is shown on the front panel display. All panel keys, except

the [On/Off] and [Shift]+[2] (Lock) keys, are locked. You can repress

[Shift]+[2] (Lock) to unlock the front panel.

5.3 Save and Recall Operations

The load can save up to 10 common parameters in nonvolatile memory (No. 1

to No. 10) for user to recall conveniently. The saved settings include the follow-

ing parameters.

Category Parameter

Main interface Voltage setting under CV mode: Vs

Current setting under CC mode: Is

Power setting under CW mode: Ps

Resistance setting under CR mode: Rs

Voltage setting and current setting under CVCC mode: Vs

and Is

Voltage setting and resistance setting under CVCR mode:

Vs and Rs

Current setting and resistance setting under CRCC mode:

Is and Rs

Voltage setting, current setting, resistance setting and

power setting under AUTO mode: Vs, Is, Ps and Rs

Config Menu Operation mode

I-Rise Slope

I-Fall Slope

Von function mode and level

You can do the save and recall operations by the following two methods.

ITech IT8000 Series User Manual

Other manuals for ITech IT8000 Series