37
If the Power Goes Out
Your system has a backup battery that keeps your system
operational during a power failure. An optional feature
allows your system to alert the central monitoring station
if the power is off for more than 15 minutes. It reports
again when power has been restored.
No Activity Time
My system uses the No Activity feature.
Partition 1
Yes. If there is no activity in my system for ____ hours
(12-99, default 24), the system will send a No Activity
report to the central station.
No. My system setup does not include this
feature.
Partition 2
Yes. If there is no activity in my system for ____ hours
(12-99, default 24), the system will send a No Activity
report to the central station.
No. My system setup does not include this
feature.
Resetting the Smoke Detector
To reset smoke detectors:
They are reset automatically.
Press the reset switch.
System Information
Paging
For what events will the central station or pagers be
notified?
According to my pager provider, the central station
account number will appear as:
________________________________________________
________________________________________________
Partition 2
Feature My system features include:
Quick Arm
Yes /
No
Quick Exit
Yes /
No
Exit Extension
Yes /
No
Keyswitch
Arming
Yes /
No
Switch Location
_________________________________
_________________________________
_________________________________
Auto STAY
Arming
Yes /
No
System Information Code
Factory code
System number
System level
CS
1
CS
2
CS
3
Pagers
Reporting
Features
12345
High Level
Reports
Low Level
Reports
Opening/
Closing
Reports
Latchkey
Reports
N/A N/A N/A
Exception
Reports
Stream-
lining
N/A N/A N/A
Partition N/A N/A N/A
To Next Page
Loading...
