ITW Dynatec c. 2003 Appendix A pg. 1
DY2008 Controller Manual #50-14 Revised 2/05
APPENDIX A
Common Accessories
Item Part Number Description
Control Upgrades
1 28.00005.107 RS232/RS485 Data Interface (must be factory installed)
2 28.11101.602 Remote Purge Control (includes 10M cable)
3 28.11101.601 Remote Front Panel Option for 4 & 8 Channel versions (must
be factory installed)
4 28.11101.612 Bracket, Remote Panel
AC Power Cords
4 28.20000.001 Power Cord, 115VAC
5 28.20000.002 Power Cord, 200VAC
6 28.20000.003 Power Cord, 230VAC
Drive Output Cables
7 05.01004.605 Drive Cable Assembly, Unterminated, 5M
8 05.01004.610 Drive Cable Assembly, Unterminated, 10M
9 05.02104.616 Drive Cable Assembly, 9.4mm DIN, 2pole, 5M
10 05.02104.622 Drive Cable Assembly for Macon Head, 5M
11 05.02104.624 Drive Cable Assembly for Macon Head, 10M
12 05.03104.000 “Y” cable for connecting two solenoids (not for DynaCold or
Macon applicators)
11 05.02104.100 Drive Cable Extension, 10M
12 108540 ILD-2 Drive Connection Cable
Sensors and Cables
13 05.65400.501 Photo Eye, Round, 5ms Response
14 05.65300.105 Photo Eye, Flat, 1ms Response
15 108239 Fiber Optic Sensor, Teach Mode, 0.2ms Response, includes
2M Cable
16 105178 Proximity Sensor, 1ms Response, includes 5M Cable
17 05.65401.201 Proximity Sensor, 2m Cable
To Next Page
Loading...