1-4
GENERAL SPECIFICATIONS
D
AILY 4X4
Base - May 2007 Print 603.93.761
Liabilities
Liabilities
1.3 Liabilities
The authorizations issu ed by IVE CO con cern solely the technical/c o n ceptual feasibility of the modification and/or fittin g to be
made on a genuine IVECO vehicle.
The bodybuilder is responsible for the:
- project of the modification or fitting;
- choice and features of the products used;
- workmanship of the modification or fitting;
- compliance of th e project and its implementation with all th e instructions provided by IVECO;
- compliance of the project and its implementation with all the current regulations in the country where the vehicle is registered;
- the functionality, safety and reliability and in general the effective performanc e of the vehicle and also the effects that the chan ges
and the conversion may have on vehicle performance and specificat ions.
1.4 Guarantees
The bodybuilder/chassis converter who has built the body or who has modified the chassis must guarantee that the work was
undertaken in a professional manner in full compliance with the specifications contained in this manual. IVECO reserves the right
to declare void its own warranties for the vehicles where:
- these specifications have not been adhered to or where unauthorised equipment was installed, or unauthorised modifications
were carried out;
- an unsuitable frame has been used for the required conversion or application;
- the specifications, standards or instructions issued by the Manufacturer for the flawless execution of the operations have not
been heeded;
- original spare parts or components which the Manufacturer has made available for specific interventions were not used;
- read and respect the safety standards and symbols applied before any operation;
- do not use the vehicle for applications other than those for which it is designed.
Maintaining the functionality of vehicle components.
The effective operation of vehicle components, all component safety and running conditions, com-
pliance with national and international regulations (e.g. EC Directives) and also accident prevention
standards must naturally be guaranteed in all permitted conversions and applications.
All our vehicles are covered by a warranty as laid down in the specific documents.
The bodybuilder must arrange to carry out operations at least in an equivalent manner.
1.5 Request for approval
The requests for approval or support to c arry out work or make modifications or fittings sh all be forwarded to t he IVECO marke-
ting offices in charge.
To obtain th e approval, the body builder shall provide adequate documents that illustrate the antic ipated implementation, u tiliz ation
and c onditions of use on the vehicle. The drawings shall highligh t an y item differing from th e in stru ctions contain ed in this manual.
The body builder shall submit the modification and/or fitting to the competent authorities for approval.
To Next Page
Loading...
Need help?
General
