Iveco DAILY 4x4 User Manual

CHASSIS MODIFICATIONS
2-7
DAILY 4x4
Print 603.93.761 Base - May 2007
Protection against Rust and Painting
Pro tecti on again st Rus t an d Pain tin g
2.2 Protection against Rust and Painting
All components installed on chassis must be painted as per Sta Iveco 18-1600 Colour IC444RAL 7021
brightness 70/80 shore.
NOTE
2.2.1 Original components
In Table 2.1 details the operations for protecting and painting the components of the original vehicle (Table 2.3 for painted parts,
Table 2.2 for non-painted or aluminium parts).
Table 2.1 - Protection category - STD 18 - 1600 (Schedule I)
Class Parts requirements Specific examples affected
A Parts in direct con tact with atmospheric agents
Body - Door mirrors - Windscreen w ipers - Aerodynamic
kit metal stru cture - su n blind metal struc ture - Metal
bumpers - Cab attachment lock - Door stopdevice - Body
fasteners (screws,bolts, n u t s, washers), etc.
B
B2
Parts in direct c ontact with atmospheric agents.with
mainly stru ctural charac teristicsin direct view.
Frame and parts, includingfasteners.
Parts beneath grille (category B).
Exterior cab steps.
B1
m
a
i
n
l
y
s
t
r
u
c
t
u
r
a
l
c
h
a
r
a
c
t
e
r
i
s
t
i
c
s
i
n
d
i
r
e
c
t
v
i
e
w
.
Only for rear axles and axles
C
Parts in direct contact with atmospheric agents.not in
direct view.
Engine and parts
D Parts not in direct contact with atmospheric agents.
Pedals - Seat reinforcements - Fasteners - etc., fitted inside
cab.
Parts must be supplied only with cataphoretic coating or rustproofing (Schedule III). The enamel will
be appliedduring the frame finishing stage.
NOTE

Iveco DAILY 4x4 Specifications

General

Brand	Iveco
Model	DAILY 4x4
Category	Scooter
Language	English