2-34
CHASSIS MODIFICATIONS
D
AILY 4x4
Base - May 2007 Print 603.93.761
Cab Modifications
Cab M odi fi cati ons
2.13 Cab Modifications
2.13.1 General Specifications
Any work on the driver’s cab must be authorised previously by IVECO.
Modifications must not prevent operation of th e c ontrol devices located in the area affected by the modifications (e.g. pedals, lin kages,
switches, pipes etc) or alter the strength of the load- bearing elements (uprights, reinforcement sections etc.). Due care must be
taken when carrying out work that may affect the cooling system and air inlet pipes of the engine.
When defining the position of payload, account shall be duly taken of the variation in cab weight, in order to ensure the correct
distribution of the permitted loads on the axles (see point 1.13).
For operations t hat require the removal of sou nd deadening panels or internal protective elements (panelling, padding) restrict the
removal to the absolute minimum, taking care to restore the protective elements to their original condition, ensuring the previous
operating capability.
Controls and equipment (power take-off en gagement control, external operating cylinder control etc.) may be fitted in the cab pro-
vided t hat:
- They are positioned, properly and are easily accessible to the driver.
- Safety, control and warning devices are fitted which meet the requirements of use and safety of the vehicle and its equipment
as well as th e requirements of n ation al legislation.
Ensure that the pipes and wires are correctly positioned particularly when the cab is tilted. Use the necessary fixings taking care to
observe the appropriate distances from the engine, heat sources and moving parts.
Provide the necessary protection from corrosion for all modifications to the structure (see point 2.2).
Ensure that the seals are fitted correctly and apply sealant to those areas which require it.
Ensure that a perfect seal is provided against the infiltration of water, dust and fu mes.
The bodybuilder must check t h at after modification, the c ab satisfies legal requirements regarding both th e inside and outside o f
the vehicle.
To Next Page
Loading...
Need help?
General
