CHASSIS MODIFICATIONS
2-37
DAILY 4x4
Print 603.93.761 Base - May 2007
Cab Modifications
Fitting a trap door
A hatch may be applied to the roof, provided that the operation does not affect the hoops and the construction guarantees
the watertightness and strength of the modified part.
Figure 2.12 illustrates an example of installation.
Figure 2.12
102773
cutting area
sealant
anchoring sectional bar
2.13.3 Occupant protection
The airbags, seat belt fixing points (the positioning of the belt retractors an d pre- tension in g devices), seat fixing, as outlined below,
are an in tegral part of the overall s afety of the occupants.
Any modification to these components may jeopardize the safety of the passengers and compliance with legal requirements.
Anchoring safety belts
Any work carried out in the areas of the seat belt fixing points may affect their compliance with EC certification.
The company carry ing out the work must verify compliance with all legal requirements in force.
Seats
The seats have been fixed to the floor structure in compliance with legal requirements on locking systems.
Moving or fitting additional seats requires making suitable fixing areas in the structure under the floor, similar to the IVECO
installation, in order to ensure compliance with the legal requirements.
To Next Page
Loading...
Need help?
General
