1-16
GENERAL SPECIFICATIONS
D
AILY 4X4
Base - May 2007 Print 603.93.761
Convention
Conve nti on
1.17 Conventions
In these bodybuilders instructions, the wheelbase is taken as the distance between the centreline of the first steering axle and
the centreline of the first rear axle (driven or non-driven). This definition differs from the definition of wheelbase in the CE Directives.
The rear overhang is taken as the distance between centreline of the last axle and the rear end of the chassis runner. For dimensions
A, B and t of the frame and counterframe section please refer to the figure below.
Figure 1.5
120360
To Next Page
Loading...
Need help?
General
