Operating the Operating Panel
67
In the main menu [ToDo] the following information is shown:
No. Element Description Reference
1 Section [Maintenance] List of device-related
tasks, e.g. refill water (the
above illustration shows
all tasks which can occur
in the [Maintenance]
section)
• “Status displays in the
section [Maintenance]”,
page 69
• “Changing/Refilling
the water in the main
tank and changing the
filter”, page 83
2 Section [Tools] List of tools still required
for the active milling jobs
• “Status displays in the
section [Tools]”, page 70
• “Inserting tools”,
page 89
3 Section [Blocks] List of blocks still required
for the active milling jobs
• “Status displays in the
section [Blocks]”,
page 70
• “Inserting blocks”,
page 99
4Section [Identification] Start manual
identification of tools and
blocks
• “Status displays in the
section [Identification]”,
page 71
• “Inserting tools”,
page 89
• “Inserting blocks”,
page 99
To Next Page
Loading...