30
The following information can be read off:
Serial number
Serial number of the furnace
Software version
Currently installed software version of the furnace. Software updates are available from
www.ivoclarvivadent.com/downloadcenter.
Last calibration UTH
Date of the last UTH calibration
Last calibration MTH
Date of the last MTH calibration
Mains voltage
Currently measured mains voltage
Operating hours
Number of operating hours
Firing hours
Number of firing hours
Total vacuum hours
Number of operating hours of the vacuum pump
IP address
Indication of the IP address
WLAN IP address
Indication of the WLAN IP address
Internet connection
Indicates whether or not the furnace is connected to the internet
MAC address
Indication of the MAC address
WLAN MAC address
Indication of the WLAN MAC address
Step 2:
Reading the information
The information is displayed on several pages. The [Arrow] buttons
are used to scroll to the next information page.
To return to the home screen, press either the [Home] button in the navigation bar or the Home button on the
membrane-sealed keypad.
2. Application
To Next Page
Loading...
