8
Warning signs and symbols on the furnace
The symbols on the furnace have the following meanings:
Symbol Note
Alternating current
Direct current
Dispose of the product according to the national legal
provisions regarding the disposal of electronic devices.
Recyclable
General warning sign. Caution when using the device. Please
read these Operating Instructions.
Warning, hot surface (burn hazard)
Beware of hand injuries (risk of crushing)
Observe the Operating Instructions
(Failure to observe the Operating Instructions may expose the
patient or operators to a risk)
Serial number
Date of manufacture
This chapter is especially important for individuals who work with the Programat CS6 or who have to carry out
maintenance or repair work. This chapter must be read and the corresponding instructions followed!
Notes on the images in the Operating Instructions
All images and illustrations in these Operating Instructions are used for exemplification and the details are not authoritative
for the construction of the furnace. They are symbols, which may slightly differ from the original, e.g. due to
simplification.
1. Indications
To Next Page
Loading...
