1
1. INTRODUCTION 3
2. OPERATING THE JABLOTRON 100 SYSTEM 3
2.1 Keypad code authorization 4
2.2 Using the system keypad 6
2.2.1 Using the segment keypads 6
2.2.1.1 Alarm Setting 9
2.2.1.2 Alarm Unsetting 9
2.2.1.3 Duress Access Control 10
2.2.1.4 Partial Alarm Setting 10
2.2.1.5 Terminating a triggered alarm 11
2.2.1.6
Section control from the keypad’s display menu
11
2.2.2 Using the JA-110E and JA-150E system keypads 12
2.2.2.1 Alarm Setting 14
2.2.2.2 Alarm Unsetting 15
2.2.2.3 Partial Alarm Setting 15
2.2.2.4 Duress Access Control 16
2.2.2.5 Terminating a triggered alarm 16
2.2.2.6
Section control by authorization
17
2.2.2.7
Section control from the keypad’s menu
17
2.3 Operating the system with a keyfob 17
2.4 Operating the system using a computer and a USB cable (J-Link) 18
2.5 Operating the system using the voice menu 18
2.6 Operating the system via the MyJABLOTRON web interface 18
2.7 Operating the system using the MyJABLOTRON smartphone app 19
2.8 Operating the system using SMS commands 19
2.9 Operating the system remotely using a computer (J-Link) 20
2.10 PG outputs control via… 20
3. BLOCKING / DISABLING THE SYSTEM 21
3.1 Blocking users 21
3.2 Blocking detectors 21
3.3 Disabling Timers 21
4. CUSTOMIZING THE SYSTEM 22
4.1 Changing a user access code 22
4.2 Changing, deleting or adding an RFID card/tag 22
4.3 Changing a username or phone number 22
4.4 Adding / deleting a user 22
4.5 Calendar events set up 22
TABLE OF CONTENTS
To Next Page
Loading...
Need help?
General
