07610-004-33-05-E
56
PARTS
PLUMBING OPTIONS
PRESSURE REGULATING VALVE OPTION*
Water Arrestor, 1/2”
06685-100-05-00
Tee, 1/2” x 1/2” x 1/2”
04730-211-27-00
Nipple, 1/2” NPT, Brass
04730-207-15-00
WATER HAMMER ARRESTOR OPTION
Water Pressure Regulator, 1/2”
04820-100-04-07
Water Hammer Arrestor
Repair Kit
(Plunger & O-ring)
06401-003-06-23
*The PRV comes standard on ER units only.
WATER TREATMENT OPTION
Replacement Cartridge
(inspect at least every 6 months)
RSC-100
Scaltrol System
04730-003-05-76
Must be installed vertically. The provided
bracket is secured to the wall. Observe
proper inlet/outlet water directions (ow
directions are molded into the top of the
head). Line pressure should be released
before changing cartridges. Machine
should be delimed before installation.
Water Hammer Arrestor
Complete Assembly
05700-002-64-67
To Next Page
Loading...
