07610-002-23-32-AC
12
INSTRUCTIONS
INSTALLATION
CHEMICAL
CONNECTIONS
PLUMBING CHECK
Slowly turn on the water supply to the machine after the incoming ll line and the drain
line have been installed. Check for any leaks and repair as required. All leaks must be
repaired before operating the machine.
Detergent
Connect detergent by removing the bulkhead tting on the back of the machine and
replacing it with the appropriate dispensing equipment.
Chemical connections
should be made by the
chemical supplier.
Rinse-aid and Sanitizer
Connect rinse-aid (and sanitizer, if an LT unit) by removing the brass plug at the base
of the rinse injector and replacing it with the appropriate dispensing equipment.
Sanitizer (LT Only) Rinse-aid
Using deionized water or
other aggressive uids
will result in corrosion and
failure of components and
will void the warranty.
WARNING! Some of the
chemicals used in
dishwashing may cause
chemical burns if they
come in contact with skin.
Wear protective gear when
handling these chemicals.
If any skin comes in
contact with these
chemicals, immediately
follow the instructions
provided with the
chemicals for treatment.
!
WARNING
To Next Page
Loading...
