CONTROLS 4
en-48
4.2.23.63 WARNING SOLENOID FAULT ____________________________________________
When this screen is shown, there is a hydraulic circuit solenoid fault.
Go to i/o diagnostics for solenoid identification.
Press the button below the
to confirm the fault.
4.2.23.64 WARNING (TST) TILT SENSOR TECHNOLOGY FAULT________________________
When this screen is shown, there is a fault with the TST. Stop as soon as possible
and contact your service dealer
Press the button below the
to confirm the fault.
4.2.23.65 WARNING MAXIMUM SLOPE ANGLE EXCEEDED____________________________
When this screen is shown, the maximum-slope angle has been exceeded.
Press the button below the
to confirm the fault.
1
0°
Slopes > = 21°
in either x or y
To Next Page
Loading...
