Jandy AquaLink RS User Manual

Page 19
Set Temperature Menu
The SET TEMP menu allows you to preset the pool and spa thermostats. The default pool temperature is 80°F. The
default spa temperature is 102°F. (The default TEMP1 temperature is 80º F. The default TEMP2 temperature is 60º F.)
SET TEMP will allow you to ENABLE the Maintain Temperature feature and adjust the hours to limit the time of day
the Maintain Temperature feature will be active.
To set Pool/Spa Temperatures
Highlight MENU/HELP and press SELECT, highlight SET TEMP and press SELECT. Inside the SET TEMP menu,
use the UP/DOWN arrow keys to highlight either POOL (TEMP1) or SPA (TEMP2) and press SELECT. Use the UP/
DOWN arrow keys to increase or decrease the temperature and press SELECT to apply.
MAINTAIN TEMP SETTING: highlight MAINTAIN and press SELECT to turn on (or off) this function. The
MAINTAIN feature will run the pump and heater as required to keep the water at the desired temperature. When this
feature is on, the system will periodically activate the pump, sample the water, and fire the heater to maintain the
preset temperature as required. Heater must be enabled at all times for this feature to maintain temperature.
HOURS: Highlight HOURS and press SELECT. Use the UP/DOWN arrow keys to change the HOURS the system
will maintain the preset temperature.
NOTE Only Dual Equipment models will maintain more than one body of water.
MENU
HELP
PROGRAM
SET TEMP
SET TIME
DISPLAY LIGHT
LOCKOUTS
PROGRAM GROUP
SYSTEM SETUP
SET TEMP
POOL HEAT
SPA HEAT
Highlight an
item and press
SELECT
80°F
104°F
MAINTAIN
HOURS
OFF
12AM-12PM
SET TEMP
POOL HEAT
SPA HEAT
Use ARROW KEYS
to set value.
Press SELECT
to continue
80°F
104°F
MAINTAIN
HOURS
OFF
12AM-12PM
SET TEMP
POOL HEAT
SPA HEAT
Highlight an
item and press
SELECT
80°F
104°F
MAINTAIN
HOURS
OFF
12AM-12PM
SET TEMP
POOL HEAT
SPA HEAT
Use ARROW KEYS
to set value.
Press SELECT
to continue
80°F
104°F
MAINTAIN
HOURS
OFF
12AM-12PM
SET TEMP
POOL HEAT
SPA HEAT
Use ARROW KEYS
to set value.
Press SELECT
to continue
80°F
104°F
MAINTAIN
HOURS
POOL
12AM-12PM
SET TEMP
POOL HEAT
SPA HEAT
Use ARROW KEYS
to set value.
Press SELECT
to continue
80°F
104°F
MAINTAIN
HOURS
SPA
12AM-12PM

Jandy AquaLink RS Specifications

General

Brand	Jandy
Model	AquaLink RS
Category	Control Panel
Language	English