Page 24
Boost Setup Menu
Use this menu to adjust the number of hours or mode of Boost Pool.
NOTE The MODE selection is only available if the Power Center Bezel dip switch 3 is turned on (Spillover mode). If it is off, then
only TIME is displayed.
The system will auto-detect the AquaPure chlorine generator.
To set Boost Pool
Highlight MENU/HELP and press SELECT, highlight SYSTEM SETUP and press SELECT, highlight AquaPure and
press SELECT. Use the UP/DOWN arrow keys to select TIME or MODE. If selecting MODE, use the UP/DOWN
arrow keys to select either SPILLOVER or POOL. If POOL is selected, the return path for the water is to the pool not
the spa.
NOTE To operate the AquaPure in BOOST mode when SPILLOVER mode is active, highlight MENU/HELP and press SELECT.
Then highlight SYSTEM SETUP and press SELECT. Highlight AquaPure and press SELECT. Highlight MODE and press
SELECT. Highlight SPILLOVER and press SELECT.
Label Auxiliary Menu
The LABEL AUX menu allows custom naming of auxiliary equipment. For example, you can set the display to read
YARD LIGHT instead of AUX 4 .
To use the Label Auxiliary menu
Highlight MENU/HELP and press SELECT, highlight SYSTEM SETUP and press SELECT, highlight LABEL
AUX, press SELECT. Highlight auxiliary to be labeled and press SELECT. Highlight either GENERAL LABELS,
LIGHT LABELS, WTRFALL LABELS, or CUSTOM LABEL and press SELECT. Use the UP/DOWN arrow keys to
highlight a name and press SELECT.
Under CUSTOM LABEL you may type in any name. Use the UP/DOWN arrow keys to change letters and use
SELECT to move to the next letter.
NOTE Please be aware that if the label NOT USED from the GENERAL LABEL menu is used on an AUX relay, the relay will not
engage.
SYSTEM SETUP
ONETOUCH
LABEL AUX
FREEZE PROTECT
AIR TEMP
DEGREES C/F
TEMP CALIBRATE
IN FLOOR CLEAN
SOLAR PRIORITY
MORE
LABEL AUX
AUX1
AUX2
AUX3
AUX4
AUX5
AUX6
AUX7
LABEL AUX1
GENERAL LABELS
LIGHT LABELS
WTRFALL LABELS
CUSTOM LABEL
CURRENT LABEL
AUX1
LABEL AUX1
GENERAL LABELS
AUX1
AERATOR
AIR BLOWER
BACKWASH
BOOSTER PUMP
CHEM FEED
CLEANER
MENU
HELP
PROGRAM
SET TEMP
SET TIME
SET AQUAPURE
DISPLAY LIGHT
LOCKOUTS
PROGRAM GROUP
SYSTEM SETUP
BOOST POOL
SYSTEM SETUP
ONETOUCH
LABEL AUX
FREEZE PROTECT
AIR TEMP
DEGREES C/F
TEMP CALIBRATE
IN FLOOR CLEAN
MORE
AquaPure
BOOST POOL
SETUP
TIME hrs24
Use ARROW KEYS
to set value.
Then SELECT.
MODE POOL
BOOST POOL
SETUP
TIME hrs24
Highlight an
item and press
SELECT.
MODE POOL
To Next Page
Loading...
Need help?
General
