Page 23
OneTouch Menu
This menu allows custom configuration of the three OneTouch mood/scene buttons. You can choose a predetermined
name from the SELECT NAME menu or enter a CUSTOM NAME. You can also select specific devices for each
mood/scene button. Each mood setting allows for an independent thermostat setting. OneTouch setting can also be
assigned to any SpaLink button.
To set up the OneTouch Buttons
Highlight MENU/HELP and press SELECT, highlight SYSTEM SETUP and press SELECT, highlight ONETOUCH
and press SELECT. Select ONETOUCH SETUP and press SELECT. Use the UP/DOWN arrow keys to choose
between SELECT NAME, or CUSTOM NAME. (For Custom Name use the UP/DOWN arrow keys to change a letter
and press SELECT to move to the next letter.)
NOTE The blank space, as used in between words, is located between the "Z" and "0" characters.
SET DEVICES: Use the SELECT button to choose a device for your choice of mood/scene settings. When an item is
selected, the ON will be displayed on the right side of the screen. Select all pieces of equipment for that ONETOUCH
button, then press the BACK button to set up next ONETOUCH setting.
Section 7. Using the System Setup Menu
SYSTEM SETUP
ONETOUCH
LABEL AUX
FREEZE PROTECT
AIR TEMP
DEGREES C/F
TEMP CALIBRATE
IN FLOOR CLEAN
SOLAR PRIORITY
MORE
ONETOUCH SETUP
Select ONETOUCH
setup and press
SELECT
SPA MODE 1
CLEAN MODE 2
ONETOUCH 3
ONETOUCH 3
DAYPARTY
NIGHTPARTY
SPAMODE
POOLMODE
ONETOUCH SETUP
ONETOUCH 3
Use arrow keys to
change letter
Press SELECT to
move to next
letter
ONETOUCH SETUP
CUSTOM NAME
ONETOUCH 3
BACKSPACE
ONETOUCH SETUP
ONETOUCH 3
SELECT NAME
CUSTOM NAME
SET DEVICES
POOL PUMP
SPA PUMP
POOL HEAT
SPA HEAT
SOLAR HEAT
AUX1
AUX2
AUX3
AUX4
MORE
ONETOUCH SETUP
ONETOUCH 3
ONETOUCH SETUP
ONETOUCH 3
SELECT NAME
CUSTOM NAME
SET DEVICES
OR
ONETOUCH SETUP
ONETOUCH 3
SELECT NAME
CUSTOM NAME
SET DEVICES
OR
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
To Next Page
Loading...
Need help?
General
