Page 25
Freeze Protection Menu
Use Freeze Protection menu to assign freeze protection to your pool and spa equipment. When a piece of equipment is
assigned to freeze protection, it will turn on when the AquaLink RS detects freezing conditions. The main filter pump
is freeze-protected as a default.
Activation temperature can be adjusted between 34° and 42° F. Default freeze protection activation temperature is 38º
F and will deactivate within 2° F.
Air Temperature Menu
Use the Air Temperature menu to turn the air temperature display on or off.
To disable Air Temperature display
Highlight MENU/HELP and press SELECT, highlight SYSTEM SETUP and press SELECT, highlight AIR TEMP
and press SELECT. Use the UP/DOWN arrow keys to highlight desired setting and press SELECT.
CAUTION
Activating the spa during freezing conditions will override freeze protection. This means that if you are
using your spa when freezing conditions exist, freeze protection will not circulate water to non-spa
related equipment that you may have freeze protected (e.g. pool cleaner, booster pump.) Under these
circumstances, the potential for equipment damage may exists.
Important Information on Freeze Protection
Freeze protection is intended to protect equipment and plumbing for short periods of freezing only. It
does this by activating the filtration pump and circulating the water to prevent freeze inside equipment
or plumbing. Freeze protection does not guarantee that equipment will not be damaged by extended
periods of freezing temperatures or power outages. In these conditions, the pool and spa should be shut
down completely (e.g. drained of water and closed for the winter) until warmer weather exists.
To use the Freeze Protection menu
Highlight MENU/HELP and press SELECT, highlight SYSTEM SETUP and press SELECT, highlight FREEZE
PROTECT and press SELECT. Use the UP/DOWN arrows keys to change the activation temperature. Once the
temperature is set, use the SELECT button to move to the next screen to assign freeze protection to a selected piece of
equipment.
SYSTEM SETUP
ONETOUCH
LABEL AUX
FREEZE PROTECT
AIR TEMP
DEGREES C/F
TEMP CALIBRATE
IN FLOOR CLEAN
SOLAR PRIORITY
MORE
AIR TEMP
DISPLAY
Choose setting
and press SELECT
ENABLED
DISABLED
SYSTEM SETUP
ONETOUCH
LABEL AUX
FREEZE PROTECT
AIR TEMP
DEGREES C/F
TEMP CALIBRATE
IN FLOOR CLEAN
SOLAR PRIORITY
MORE
FREEZE PROTECT
Use ARROW KEYS
to set value.
Press SELECT
to continue.
TEMP
38°F
FILTER PUMP X
SPA
SOLAR HEAT
ROCKFALL
AUX2
AUX3
AUX4
MORE
FREEZE PROTECT
DEVICES
To Next Page
Loading...
Need help?
General
