Jandy PureLink - Operational Recommendations

Page 37
5.6 Recommendations
DO List
• Readandkeepyourmanualinasafeplace.
• Increasechlorineproductionratebeforealargenumberofbathersenterthepoolandreturntonormal
afterwards.
• Increasechlorineproductionratewhentemperaturegoesup.
• Increasechlorineproductionratewhenthenumberofbathersgoesup.
• Usestabilizer(cyanuricacid)tostabilizechlorineinpool.
• Mountpowercenterinshadeoroutofthedirectsunlightwheneverpossible.
• Decreaseproductionratewhentemperaturegoesdown(forexample,intheFallandWinterseasons).
• Takepoolwatersampletopoolprofessionaloncepermonth.
DON’T List
• Donotgetfertilizerinyourpool.Fertilizerscontainnitrateswhichcauseahighchlorinedemandon
pool water.
• NeverusedryacidtoadjustpHinaridgeographicareaswithexcessiveevaporationandminimal
dilution of pool water with fresh water. A build up of by products can damage the electrolytic cell.
• Donotaddchemicalsorsalttothepoolunlessthechlorinatoristurnedoff.
• Donotletchlorinestabilizer(cyanuricacid)dropbelow50PPM.
• Donotaddsaltwithoutrstcheckingthepoolsalinitylevel.Toomuchsaltcandisableandpossibly
damage the chlorinator.