Jandy VSSHP220DV2A - User Manual

WARNING
FOR YOUR SAFETY - This product must be installed and serviced by a contractor who is licensed and
qualified in pool equipment by the jurisdiction in which the product will be installed where such state or
local requirements exist. The maintainer must be a professional with sufficient experience in pool equipment
installation and maintenance so that all of the instructions in this manual can be followed exactly. Before
installing this product, read and follow all warning notices and instructions that accompany this product.
Failure to follow warning notices and instructions may result in property damage, personal injury, or death.
Improper installation and/or operation will void the warranty.
Improper installation and/or operation can create unwanted electrical hazard which can
cause serious injury, property damage, or death.
ATTENTION INSTALLER - This manual contains important information about the installation,
operation and safe use of this product. This information should be given to the owner/
operator of this equipment.
INSTALLATION AND
OPERATION MANUAL
VSFHP185DV2A
VSFHP270DV2A
VSPHP270DV2A
VSSHP220DV2A
VSSHP270DV2A
Jandy
Variable-Speed Pumps
ENGLISH | FRANÇAIS | ESPAÑOL

Jandy VSSHP220DV2A Specifications

General

Brand	Jandy
Model	VSSHP220DV2A
Category	Water Pump
Language	English

Summary

Jandy Variable-Speed Pumps Installation and Operation Manual

Important Safety Instructions

General Safety and Warning Guidelines

Covers electrical safety, suction entrapment, and operational warnings for safe use.

Pool Pump Suction Entrapment Prevention

Guidelines to prevent suction entrapment hazards, including suction outlet requirements.

General Description and Specifications

Introduction and Product Overview

Introduction to Jandy Variable-Speed Pumps and their features.

Product Dimensions

Physical dimensions of the variable-speed pumps with a diagram.

Product Specifications and Contents

Detailed specifications, including electrical, union size, and weight, plus package contents.

Installation Information and Procedures

Motor Clearance, Plumbing and Pump Location

Details on motor clearance, pump location, plumbing preparation and pipe sizing.

Electrical Installation Requirements

Covers voltage checks, grounding, bonding, GFCI protection, wiring, and adjustable base dimensions.

Pump DIP Switch Settings and Auxiliary Relays

Configuration of DIP switches and operation of auxiliary relays for pump control.

Conduct Pressure Test Procedure

Step-by-step guide for conducting a pressure test, including safety warnings.

Operation and Start-up Procedures

Pump Start-up and Priming Process

Detailed steps for starting the pump, including priming for water level above or below.

Service and Maintenance

Pump Lid and Basket Cleaning

Procedure for safely removing the pump lid, cleaning the basket, and reseating the lid.

Winterizing the Pump

Instructions for draining and protecting the pump during freezing temperatures.

Troubleshooting and Repair Guide

Motor Start-up, Power, and Shut-off Issues

Diagnosing and resolving issues related to motor start-up, power, and periodic shut-offs.

Relay, Dry Contact, and Impeller Issues

Troubleshooting relays, dry contacts, and clearing a blocked impeller.

Product Specifications and Technical Data

Exploded Views of Pump Components

Detailed diagrams showing the breakdown of Jandy DV2A Model Variable Speed Pump parts.

Performance Curves for Various Models

Graphs illustrating pump performance at various speeds and flow rates for multiple models.