Connection variants
Connecting a UMG 96RM-P or -CBM to a PC via the USB
interface:
Connecting a UMG 96RM-P or -CBM to a PC via an
interface converter:
Connecting a UMG 96RM-P or -CBM via a UMG 604
as gateway:
Ethernet RS485
RS485
GridVis network analysis software
The UMG 96RM-P/-CBM can be programmed and read
out using the GridVis network analysis software included
in the scope of deliverables. A PC must be connected
via a serial interface to the USB or RS485 interface
of the UMG 96RM-P/-CBM for this (see connection
variants).
GridVis features
• Programming the UMG 96RM-P/-CBM
• Graphical representation of measured values
To Next Page
Loading...
