Firmware update
If the device is connected to a computer via Ethernet,
then the device firmware can be updated via the GridVis
software.
Select a suitable update file (menu Extras / Update de-
vice) and the device and the new firmware will be trans-
ferred.
Abb. Firmwareupdate-Assistent der Software GridVis
Battery
The internal clock is fed from the supply voltage.
If the supply voltage fails then the clock is powered
by the battery. The clock provides date and time infor-
mation, for the records, min. and max. values and re-
sults, for example.
The life expectancy of the battery is at least 5 years with
a storage temperature of +45°C. The typical life expec-
tancy of the battery is 8 to 10 years.
The battery is replaced via the battery insert provided
on the rear of the device. Make sure that the correct
type of battery is used and correct polarity is observed
when inserting the battery (positive pole faces the rear
of the device; negative pole faces the front).
See chapter "Changing the battery" for more informa-
tion.
To Next Page
Loading...
Need help?
General
