Cancel
PRESS + MARK
?
SET
q
w
v
z
x
c
b
Adjusting Key Position of Touch Screen
To adjust touch panel:
1. While pressing the Needle Up/Down button
q , turn the Power ON w . (Keep pressing the
Needle Up/Down button until the PRESS
MARK and + mark appears.)
q
Needle Up/Down Button
w Power Switch
2. Press the + mark with the tip of the additional
spool pin. (Press
z to b in order.)
3. When you press the fifth +, ADJUSTMENT
END will appear.
4. Turn the Power OFF
w .
5. Turn the Power ON and check the Touch
Panel again.
If a different pattern appears on the touch panel when you pressed the touch panel for
selecting a desired pattern, follow the instructions below.
26
To Next Page
Loading...
