Replacing the face cover
To remove:
1. Remove Screws A (2 pieces)
q and remove
the Face Cover
w .
To attach:
2. Attach the Face Cover and tighten Screws A
(2 pieces)
q temporarily.
3. Close the Face Cover
w and check the
difference in level between the Top Cover
e
and thread guide cover r , then tighten
Screws A (2 pieces)
q .
4. Adjust the Face Cover position to ensure that
the Face Cover
w closes firmly.
q
Screws A
Replacing the top cover
To remove:
1. Remove the Screws B (2 pieces)
t and close
the Top Cover
e and raise the handle, then
remove the Screw C
y .
2. Raise the Top Cover and remove the Top Cover
to the direction of the arrow.
To attach:
3. Raise the handle and insert the Top Cover e
from the backside of the machine.
4. Tighten Screws B
t and C y to attach the
top cover.
w Face Cover
e Top Cover
r Thread Guide Cover
t Screws B
y Screw C
MECHANICAL ADJUSTMENT
Changing External Parts (1) Face Cover / Top Cover
w
e
r
t
y
q
1
To Next Page
Loading...
