Janome Memory Craft 10001 - Changing External Parts (2) Belt Cover; Replacing Needle Threader Unit

Replacing the belt cover
To remove:
1. Remove the Cap
q and Screw A w .
2. Loosen Screw B
e and remove Screws C r
and D t .
To attach:
3. Match the Belt Cover to the Front Cover.
4. Attach the Belt Cover with Screws A
w , B e ,
C
r , D t .
5. Attach the Cap
q .
q
Cap
w Screw A
e Screw B
r Screw C
t Screw D
Changing External Parts (2) Belt Cover
q
w
e
t
r
2