q
w
e
r
y
t
q
q
Replacing the bed cover
To remove:
1. Remove the Base Cover.
2. Remove Screws A
q (2 pieces) and the Base
Lid
w .
3. Remove Screws B
e (2 pieces) and pull out
the connector
r , then remove the Bed Cover
t .
q
Screws A
w Base Lid (1)
e Screws B
r Connector
t Bed Cover
y Drop Feed Knob
To attach:
4. Follow the above procedure in reverse.
* Set the Drop Feed Knob
y as shown, place
and attach the mated connectors
r in the
Bed Cover
t .
Replacing the base cap
To remove:
1. Remove Screws (5 pieces)
t and the Base
Lid
w .
To attach:
2. Attach the Base Lid
w and secure it with
Screws
q .
q
Five Screws
w Base Lid
Changing External Parts (4) Bed Cover / Base Cap
w
4
To Next Page
Loading...
