185
Sleeper Sofa and Dinette
The sofa(s) in your recreation vehicle are designed to oer both ample seating and additional
sleeping capacity.
To convert the sofa into the bed position, pull forward on the top of the sofa back (A). As
the sofa back comes forward, grasp it at the bottom and rotate the seat back until it reverses
(B) and lays at next to the sofa seat (C). Repeat this process on the sofa on the other side of
the vehicle. Set the sofa lock mechanism to the “LOCK” position. (See Power Bunk Bed
section for explanation of the sofa lock mechanism)
Unlock the sofa lock mechanism to allow the bed to convert to a seat back. Reverse the
above process by lifting the front corner of the back cushion and rotating it until it reverses.
Continue to push on the sofa back until it is in the upright sofa position with the back of the
sofa against the wall. Both sections of the bed require this process.
The bed must be fully lowered to convert it into the sofa.
Oil based soaps and cleaners are not recommended. No abrasive
cleaners or alcohol cleansers should be used. If other cleaner solutions are
used, rst try on a spot in an inconspicuous area.
To Next Page
Loading...
