Jayco Seismic 2021 - Auto Leveling Control Touch Pad; Auto Leveling Touch Pad

50

 - App available from Google Play or iTunes
for Apple or Android devices.
 - Optional (located inside the entrance door).

- Red/Green LED indicates system status
- Up Arrow extends front jacks (landing gear)
 - Down Arrow retracts front jacks (landing
gear)
D - Auto Level button places system in the auto
level mode
 - Hitch Height button initiates the Hitch Rec-
ognition feature
 - Retract All button puts leveling system in
full retract mode.

Touch pad is locked
Touch pad is active
Jacks are moving
Low battery

The OneControl touch screen or Leveling App will show the specic error.
Refer to troubleshooting section of the LCI Ground Control 3.0 manual to clear the error.


1. Before unhitching from the tow vehicle, ensure the RV is parked on a level surface and
tires are chocked.
2. Extend the inner legs of both landing gear (front jacks) to within 4”- 5” of the ground
by pulling on the quick release pins.
3. Turn on the touchpad by pressing both arrow buttons simultaneously. LED illuminates
solid green.
4. Press the UP arrow button to extend the front jacks to lift the front of the RV taking
weight o the hitch.
5. Uncouple the RV connection to the tow vehicle. Pull tow vehicle away.

 Pressing both the arrow buttons simultaneously turns on the touch-
pad. Touchpad will time out after 7 minutes of non-use.
 When the leveling cycle has started, it is important there is no
movement inside the RV until leveling is complete. Failure to remain still
during leveling could affect the performance of the leveling system.