51
1. Turn on the touchpad.
2. LED will light up solid green.
3. Select AUTO LEVEL and the auto leveling process begins. Front of the RV will seek
a position near level. Rear jacks will be grounded (on 4 point system). Side to side
leveling will begin.
4. Each jack will perform a nal grounding touch.
1. Press the button at the bottom of the touch panel
to power up the display.
2. Select MyRV Control Panel from the menu listing
on the screen.
3. Then select the Leveler icon.
The following functions can be operated using the
OneControl Touch Panel inside the RV. Refer to the
Lippert Ground Control 3.0 manual for complete in-
structions.
Standard Mode and Menu
Basic Jack operation
Unhitching instructions
Auto Leveling
Hitch Recognition
1. Download the OneControl App for your device
from Google Play Store or Itunes.
2. To access the OneControl App, ensure there is
power to the RV’s wireless network hub.
3. Navigate to the device’s Wi-Fi settings (on the phone, tablet, etc). Turn the wireless
feature on and connect to the MyRV wireless network.
4. A password will be required to access the network. The password is found on the RV’s
wireless hub (8 capital alpha characters).
5. Open the OneControl App on the phone or tablet.
6. The App will request the user to “Agree” with a license agreement, connect to the
MyRV system by entering the PIN (default is 1,2,3,4 for OneControl Touch Panel).
Then it will prompt you to create a new PIN and then re-enter the new PIN.
7. The App will now display all functions. Choose Leveler.
On a 6 point system the 2 middle jacks will be grounded to stabi-
lize the trailer. The 2 middle jacks do not level the RV
If the AUTO LEVEL sequence does not perform as described
above, place the system in manual mode and test that the jacks operate
correctly by using the OneControl touch panel inside the RV.
To Next Page
Loading...
