68
To set up the side rails, remove the safety pins (2 per post)
from the bottom of the rail posts. Lift the rail to the upright
position and secure it in place by inserting a safety pin through
each hole in the bracket and the rail. Secure the triangular wire
safety clip on the end of each pin. Repeat the process on all
corner rail posts
The patio deck is equipped
with mesh end curtains that
snap to the door jamb of the
rear cargo ramp door (or the
side patio door jamb) and to
the frame work of the railings.
These curtains close o the
gap between the railing and
the door jamb.
Before extending the screen wall, remove all obstacles from its
path. To extend the screen wall, grip the strap attached to the
pull bar and gently pull down. Grasp the screen wall by the pull
bar and continue pulling until it is completely extended. Make
sure it is securely attached to the oor catch.
To return the screen wall to the stored position, pull up on the
pull bar handle to release it from the oor catch. Push the screen
wall up until it is fully retracted.
When returning the cargo door to the stowed posi-
tion, be sure all safety pins used to secure the rails
during transit are in place and secure with the safety
clip in place. Failure to do so could result in damage
to the rail and door.
Make sure to remove the patio support cables, safety pins
and quick links before folding up the ramp door. Failure to do so may damage
the ramp door or door mechanism. Store items in the toolbox in the garage
oor.
To Next Page
Loading...
