JB-Lighting licon1

To Next Page

To Previous Page

JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein phone: +49 7304 9617-0

www.jb-lighting.de - 2 -

Main Page

General Remarks3
Index4
- Table of Contents4
1 First Steps7
- Unpacking and Powering up7
- Changing Voltage Setting7
- DMX-Outputs7
2 Configuration (Setup)8
- L-USER / Configuration of a Self-Defined Fixture Setup8
- SELECT / CONFIG-Set Configuration by Means of Library11
  - Delete One Fixture from List11
  - Delete All Fixtures from List11
- PATCH / Assignment of Fixtures Start Addresses11
- PATCH Assignment of DMX Channels to Dimmer/Par Section13
- P-COPY Copy Presets15
- PANTIL / Inversion of Pan and Tilt Channels15
  - Revocation of Pan And/Or Tilt Inversion15
  - Swap Pan and Tilt Channels16
- The MIDI Function16
- ACCESS / Passwords18
3 Programming the Fixtures and Dimmers in Combi-Section20
- Direct Access to Fixtures20
- To Program and Recall of Fixture Groups21
- The Highlight Function22
- How to Program Fixtures by Means of Encoder Wheels22
  - Postitioning in 16Bit22
4 Presets23
- Programming and Storing Presets23
- Name a Preset23
- Recall Presets24
- Fading Presets24
5 Preprogrammed Moving Patterns25
- Phase Function26
6 Cues (Combi-Section)27
- Programming and Storage of Cues27
7 Edit Cues33
- Editing the Name33
- Edit Fixture Parameter34
- Copy One Cue to Another Cue Key34
- Enter Release Link Function (R-Link)34
- Change Fade Time35
- Change Trigpoint35
- Manual Cue Fading35
8 Freeze Function36
- Enter Freeze Function36
- Delete Freeze Function36
9 Fixture Chases38
- Programming Chases Cue-By-Cue38
- The Chase Menu39
- Enter Chase Name39
- Enter Duration and Speed of Chase Steps39
- Insert a Chase Step41
- Overwrite a Chase Step41
- Delete All Chase Data41
- Delete a Single Step41
- Double One Chase Step42
- Stop a Chase / R-Link42
- Loop Function42
- Block Function42
10 Chase Generator44
- Programming with the Chase Generator, First Steps44
  - The Matrix of the Chase Generator45
- Parameters of the Chase Generator46
11 Merge Function53
- Enter the Merge-Function53
- Delete the Merge-Function53
- The Speed Groups54
  - Integrate Cases to Speed Groups54
  - Delete a Chase from a Speed Goup54
- The Sychronized Start/Sync-Start Function55
  - Enter Sync Start Function55
  - Delete Sync Start Function55
- The Sound Function/Beat Count55
12 The Chase Control Section56
- Selection of Chase56
- Speed Change by Means of Encoder Wheel56
- Speed Change by Means of the Learn Key57
- Manual Stepping (Go Keys)57
- Change of Direction57
- The Restart Function57
- The Sync Function58
- The Sound Function58
13 Edit a Chase59
14 Sequences60
- Enter Step of a Sequence60
- Name Sequence61
- Enter Duration61
15 The List Function63
16 PAR Section64
- Direct Access66
- Encode Mode66
- Block Mode67
- Hilite Mode68
- Parout Mode68
- The Numeric Block69
- Name PAR Channels71
- Store PAR Presets71
  - Recall PAR Presets72
  - Fade PAR Presets72
17 Data Storage73
- Format Floppy Disc73
- Selective Data Storage73
  - Selective Storage of Presets74
- Selective Re-Load of Data into the Desk74
  - Selective Re-Load of Preset Data75
18 Timeline Programming (Music Synchronized)76
- Enter a Music CD76
- Basic of Timeline Programming: LOOP76
- Simple Timeline Programming77
  - Assign Cues and Chases (Events)78
  - Move Cues and Chases78
19 The CD-Player79
20 Trackball80
21 Delete All Data81

JB-Lighting licon1 - Page 2

Table of Contents