JB-Lighting licon1 - 8 Freeze Function; Enter Freeze Function; Delete Freeze Function

JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein phone: +49 7304 9617-0
www.jb-lighting.de - 36 -
8 Freeze function
The freeze function can be assigned to each fixture. After freezing one
parameter, it will not be affected by recalling new DMX value by cues,
chases or sequences.
The freeze key is located in the feature-selection block on the left hand
side.
A parameter with the freeze function assigned can be overwritten by a
preset.
8.1 Enter freeze function
Activate fixtures by pressing keys of the fixture/PAR selection block
Press freeze key and simultaneously the feature key of the desired parameter.
The store matrix will display the frozen feature by showing dark squares.
Example: Freeze function for Gobo 1
1. 2. 3. 4.
The freeze function can be assigned to each feature available.
After activating the freeze function LED of the key will be lit.
8.2 Delete Freeze function
The freeze function can be deleted selectively for one parameter only or for all parameters at the same time.
• Delete freeze function completely
Activate fixtures by pressing fixture/PAR selection keys