JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein phone: +49 7304 9617-0
www.jb-lighting.de - 32 -
6.1.9 The flash function
All cue keys work in a switch mode.
If a cue has to be recalled in a flash-mode style (for strob-
sequences) a release-link has to be assigned before.
The flash-key is situated in the Enable-Release-Flash block
which is next to the sequence block.
Enter the release-linke like described in chapter 6.1.7 and
6.1.8
To work with the flash mode proceed as follows:
Create a cue and store it on one of the cue keys. Store a release-link afterwards.
Press the flash key and simultaneously press the cue key to recall the cue in a flash-mode style.
Release both keys to deactivate function.
To Next Page
Loading...