JB-Lighting licon1 - 12 The Chase Control Section; Selection of Chase; Speed Change by Means of Encoder Wheel

JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein phone: +49 7304 9617-0
www.jb-lighting.de - 56 -
12 The chase control section
The chase control section enables direct access to running chases and speed groups.
The speed and direction of the chases and speed groups can be changed
independent from the programmed data.
encoder wheel: for manual speed regulation
restart key: starts running chase from first step (in combination with chase key)
Select-Taste: zur Chase-Anwahl
Learn key: speed regulation and adaptation to beat by tapping key.
Sync key
Direction key: changes direction of chase
Sound-Taste:
Go - key: manual chase stepping opposite to the actual direction of the chase
Go + key: manual chase stepping in direction of the chase
Go key: stops chase and activates Go – and Go + keys.
12.1 Selection of chase
Press key select and simultaniously press chase key.
To change speed or direction following options are
available:
12.2 Speed change by means of encoder wheel
Select chase (à see chapter 11.1)
Change speed by turning the chase control sections encoder wheel.