39
5. Operation and maintenance devices
From a certain load of the exhaust gas aftertreatment system, the process of
regeneration cannot be further suppressed. Then a parked regeneration is required.
In the menu of the exhaust gas aftertreatment there is a second window, which can be
reached using the arrow keys [↑] [↓].
The window provides an overview of the loading of the system for exhaust gas
aftertreatment. The explanation of the two types of regeneration can be found in
paragraphs 5.7.1.3.5 and 5.7.1.3.6 .
5.7.1.3.5 Automatic regeneration:
During the so-called automatic regeneration, the chipper can continue to be used in
parallel as usual.
As soon as the automatic regeneration begins, the following window will appear. If
elevated temperatures are expected, this is shown on the display. Furthermore, the
DPF symbol in the display flashes. "Feeder activatable" is only displayed when the
feeder is ready.
Figure 6- Display of the load and the loading pressure
Figure 7- Control window with regeneration activated
To Next Page
Loading...
