44
5. Operation and maintenance devices
5.7.1.3.11 General information
It should be noted that the illustrations may differ, as the
menu navigation may look different depending on the engine
brand used.
Engines with exhaust gas aftertreatment should, if possible,
be operated at full load in order to avoid contamination of the
filter system for exhaust gas aftertreatment.
Affecting the engine over a longer period of time in the
stationary gas leads to heavy contamination of the particulate
filter.
It should be noted that after regeneration, the values of ash
loading and soot loading usually do not drop to zero percent,
since a residual amount remains.
As long as an error code is displayed on the HCflex , no
regeneration is possible!
The version of the installed software can be read during the
home screen (see Figure 16). The version of the hardware
used can be read on the back of the HCflex
see Fi
ure 16
.
Figure 16: Software and hardware version of HCflex
To Next Page
Loading...
